Setting A Schedule To Block Or Allow Traffic - NETGEAR ProSafe FVS338 Reference Manual

FVS338 ProSafe VPN Firewall 50 Reference Manual

Setting a Schedule to Block or Allow Traffic

If you defined an outbound or inbound rule to use a schedule, you can set up a schedule for when
blocking occurs or when access is restricted. The firewall allows you to specify when blocking
will be enforced by configuring one of the Schedules—Schedule 1, Schedule 2 or Schedule 3.
To invoke rules and block keywords or Internet domains based on a schedule:
1. Select Security from the main menu and Schedule from the sub-menu. The Schedule 1 screen
will display.
2. Check the radio button for All Days or Specific Days. If you chose Specific Days, check the
radio button for each day you want the schedule to be in effect.
3. Check the radio button to schedule the time of day: All Day, or Specific Times. If you chose
Specific Times, enter the Start Time and End Time fields (Hour, Minute, AM/PM), which will
limit access during certain times for the selected days.
4. Click Reset to cancel your settings and revert to the previous settings.
5. Click Apply to save your settings to Schedule 1.
Repeat these 5 steps to set to a schedule for Schedule 2 and Schedule 3.
Figure 4-13
4-20 Firewall Protection and Content Filtering
v1.0, September 2006