NETGEAR ProSafe FVS338 Reference Manual page 76

FVS338 ProSafe VPN Firewall 50 Reference Manual
Figure 4-12
To add a service:
1. Select Security from the main menu and Services from the submenu. The Services screen will
display.
2. In the Add Custom Service table, enter a descriptive name for the service (this is for your
convenience).
3. Select the Layer 3 Protocol that the service uses as its transport protocol. It can be TCP, UDP
or ICMP.
4. Enter the first TCP or UDP port of the range that the service uses. If the service uses only one
port, then the Start Port and the Finish Port will be the same.
5. Enter the last port of the range that the service uses. If the service only uses a single port
number, enter the same number in both fields.
6. Click Add. The new custom service will be added to the Custom Services Table.
4-18 Firewall Protection and Content Filtering
v1.0, September 2006