NETGEAR ProSafe FVS338 Reference Manual page 83

To add a Port triggering rule:
1. Select Security from the main menu and Port Triggering from the submenu. The Port
Triggering screen will display.
1. Enter a user-defined name for this rule in the Name field.
2. From the Enable pull-down menu, indicate if the rule is enabled or disabled.
Figure 4-16
3. From the Protocol pull-down menu, select either TCP or UDP protocol.
4. In the Outgoing (Trigger) Port Range fields;
a. Enter the Start Port range (1 - 65534).
Firewall Protection and Content Filtering
FVS338 ProSafe VPN Firewall 50 Reference Manual
v1.0, September 2006
4-25