Enabling Trend Micro Antivirus Enforcement - NETGEAR ProSafe FVS338 Reference Manual

FVS338 ProSafe VPN Firewall 50 Reference Manual
• None – the router neither broadcasts its route table nor does it accept any RIP packets
from other routers. This effectively disables RIP.
4. Select the RIP Version from the pull-down menu:
• RIP-1 – classful routing and does not include subnet information. This is the most
commonly supported version.
• RIP-2 – supports subnet information. Both RIP-2B and RIP-2M send the routing data in
RIP-2 format:
• RIP-2B – uses subnet broadcasting.
• RIP-2M – uses multicasting (see Note below).
5. RIP authentication is disabled by default. To enable authentication for RIP-2B or RIP-2M,
a. Check the Yes radio button.
b. Input MD5 keys and effective and end dates for the First Key Parameters and Second
Key Parameters for MD5 based authentication between routers.
6. Click Apply to save your settings.
Note: Multicasting can reduce the load on non-router machines because they do

Enabling Trend Micro Antivirus Enforcement

If you have installed the Trend Micro Client/Server Messaging Suite for SMB on your local
network, the firewall can enforce antivirus scanning. When Antivirus Enforcement is selected,
local PCs will not be allowed web access unless they have the Trend Micro OfficeScan client
installed and updated with the latest virus definitions.
To enable Trend Micro Antivirus Enforcement:
1. Select Security from the main menu and Trend Micro from the submenu. The Trend Micro
screen sill display.\
2. Check the Yes radio box for Do you want to enable antivirus Enforcement?.
3-12
not listen to the RIP multicast address and will not receive the RIP packets.
However, if one router uses multicasting, then all routers on your network
must use multicasting. For RIP-2B and RIP-2M you can select the type of
authentication as NONE or MD5. If you select MD5 then you need to enter
additional parameters.
v1.0, September 2006
LAN Configuration