Configuring The Vpn Client - NETGEAR SRXN3205 - ProSafe Wireless-N VPN Firewall Wireless Router Reference Manual

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual

Configuring the VPN Client

From a PC with the Netgear Prosafe VPN Client installed, you can configure a VPN client policy
to connect to the SRXN3205.
To configure your VPN client:
1. Right-click on the VPN client icon in your Windows toolbar and choose Security Policy
Editor.
2. In the upper left of the Policy Editor window, click the New Document icon to open a New
Connection. Give the New Connection a name, such as SRXN.
Figure 6-5
3. From the ID Type pull-down menu, choose IP Subnet.
4. Enter the LAN IP Subnet Address and Subnet Mask of the SRXN3205 LAN. Check the
Connect using radio box and choose Secure Gateway Tunnel from the pull-down menu.
5. From the first ID Type pull-down menus, choose Domain Name and enter the FQDN address
of the SRXN3205.
6. From the second ID Type pull-down menu, choose Gateway IP Address and enter the WAN
IP Gateway address of the SRXN3205.
6-8 Virtual Private Networking Using IPsec
v1.0, October 2008