NETGEAR ProSafe FVS338 Reference Manual page 119

9. If Edge Device was enabled, select the Authentication Type from the pull down menu which
will be used to verify account information: User Database, RADIUS-CHAP or RADIUS-PAP.
Users must be added thorough the User Database screen (see
on page 5-22 or "RADIUS Client Configuration" on page
Note: If RADIUS-PAP is selected, the router will first check the User Database to
see if the user credentials are available. If the user account is not present, the
router will then connect to the RADIUS server.
10. Click Apply. The new policy will appear in the IKE Policies Table (a sample policy is shown
below)
Figure 5-20
Virtual Private Networking
FVS338 ProSafe VPN Firewall 50 Reference Manual
v1.0, September 2006
"User Database Configuration"
5-23).
5-29