NETGEAR ProSafe FVS338 Reference Manual page 136

FVS338 ProSafe VPN Firewall 50 Reference Manual
To modify User or Admin settings:
1. Select Administration from the main menu and Set Password from the submenu. The Set
Password screen will display.
2. Select the Settings you wish to edit by checking either the Edit Admin Settings or Edit Guest
Settings radio box.
3. Change the password by first entering the old password, and then entering the new password
twice.
4. Click Apply to save your settings or Cancel to return to your previous settings.
5. Change the Idle Logout Time field to the number of minutes you require. The default is 5
minutes.
6. Click Apply to save this setting.
Note: If you make the administrator login time-out value too large, you will have to
wait a long time before you are able to log back into the router if your previous
login was disrupted (i.e., you did not click Logout on the Main Menu bar to
log out).
Figure 6-1
6-8
v1.0, September 2006
Router and Network Management