NETGEAR ProSafe FVS338 Reference Manual page 57

3. Enter the IP address of the OfficeScan Server on your local network.
4. Enter the 5-digit port number used for communications between the OfficeScan clients and the
server.
5. Click Apply to enable Trend Micro.
The Host Exclusion List table lists PCs that are allowed to access the WAN without OfficeScan
client.
Note: The OfficeScan Server must appear in the exclusion list.
To allow a PC to access the web without the OfficeScan client:
Enter the IP address of the PC in the Host field in the Add Host section and click Add. The
address will be added to the Host Exclusion List table.
Figure 3-6
Note: Follow the instructions in the Trend Micro documentation to complete the
installation and configuration of the Trend Micro OfficeScan Server.
LAN Configuration
FVS338 ProSafe VPN Firewall 50 Reference Manual
v1.0, September 2006
3-13