Testing The Connection - NETGEAR ProSafe FVS338 Reference Manual

18. In the left frame, expand Key Exchange (Phase 2) and select Proposal 1. Compare with the
figure below. No changes should be necessary.
19. In the upper left of the window, click the disk icon to save the policy.
Figure 5-14

Testing the Connection

To test your VPN connection:
1. Right-click the VPN client icon
select My Connections\to_FVS.
Within 30 seconds you should receive the message "Successfully connected to My
Connections\to_FVS" and the VPN client icon in the toolbar should display On:
2. For additional status and troubleshooting information, right-click the VPN client icon
your Windows toolbar and select Connection Monitor or Log Viewer; or view the VPN Logs
and VPN Connection Status of the FVS338.
Virtual Private Networking
FVS338 ProSafe VPN Firewall 50 Reference Manual
in your Windows toolbar and select Connect..., and then
v1.0, September 2006
in
5-19