NETGEAR ProSafe FVS338 Reference Manual page 117

9. Specify the VPN policy settings. These settings must match the configuration of the remote
VPN client. Recommended settings are:
• SA Lifetime: 3600 seconds
• Authentication Algorithm: SHA-1
• Encryption Algorithm: 3DES
10. Click Apply. The new record should appear in the VPN Remote Host Mode Config Table (a
sample record is shown below).
Figure 5-19
To configure an IKE Policy:
1. From the main menu, select VPN. The IKE Policies screen will display showing the current
policies in the List of IKE Policies Table.
Virtual Private Networking
FVS338 ProSafe VPN Firewall 50 Reference Manual
v1.0, September 2006
5-27