Monitoring The Router; Enabling The Traffic Meter - NETGEAR ProSafe FVS338 Reference Manual

FVS338 ProSafe VPN Firewall 50 Reference Manual
If required, you can also enter the address of another NTP server in the Server 2 Name/IP
Address field. If you select this option and leave either the Server 1 or Server 2 fields
empty, they will be set to the Default Netgear NTP servers.
5. Click Apply to save your settings or click Cancel to revert to your previous settings.
Figure 6-5

Monitoring the Router

You can be alerted to important events such as WAN port rollover, WAN traffic limits reached, and
login failures and attacks. You can also view status information about the firewall, WAN ports,
LAN ports, and VPN tunnels.

Enabling the Traffic Meter

To monitor traffic limits on each of the WAN ports, select Administration from the main menu
and Traffic Meter from the submenu. The Broadband Traffic Meter screen will display. (The
Broadband and Dialup ports are programmed separately.) A WAN port shuts down once its traffic
limit is reached if the Block all traffic feature is enabled.
The Traffic Meter screen also provides the following information:
• Internet Traffic Statistics – Displays statistics on Internet Traffic via the WAN port. If you
have not enabled the Traffic Meter, these statistics are not available.
6-16
v1.0, September 2006
Router and Network Management