Spider Removal; Roller, Pin And Thrust Washer Inspection - Polaris RZR 900 2017 Service Manual

SPIDER REMOVAL

1. Install clutch onto holding fixture and secure in bench
vice. Loosen and remove the spider jam nut
(counterclockwise) using the Clutch Spider Nut
Socket.
Clutch Spider Nut Socket: PU-50578
Clutch Holding Fixture: 2871358-A
2. Loosen and remove the spider
using Clutch Spider Removal / Installation Tool (PN
2870341).
Spider Removal / Installation Tool: 2870341
Clutch Holding Fixture: 2871358-A
9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual
© Copyright Polaris Industries Inc.
ROLLER, PIN AND THRUST WASHER
INSPECTION
q
1. Inspect all rollers, roller bushings and roller pins by
2. Turn roller with your finger. If you notice resistance,
w
(counterclockwise)
pulling a flat metal rod across the roller.
galling, or flat spots, replace the drive clutch.
NOTICE
Rollers, pins, thrust washers and buttons are not
serviceable at the time of this publication.
PVT SYSTEM
6
6.17