Rear Brakes; Rear Caliper / Brake Pad Removal - Polaris RZR 900 2017 Service Manual

Hide thumbs Also See for RZR 900 2017:

Table of Contents

REAR BRAKES

1. Elevate and support rear of vehicle.

Use care when supporting vehicle so that it does not tip

or fall. Severe injury may occur if machine tips or falls.

2. Remove the rear wheel.

3. Loosen pad adjuster screw

4. Remove the two caliper mounting bolts and lift caliper

off the brake disc.

When removing caliper, be careful not to damage brake

line. Support caliper to avoid kinking or bending brake

9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual

5. If brake caliper will not come off, push caliper piston

into the caliper bore slowly using a C-clamp or locking

pliers with pads installed.

Brake fluid will be forced through compensating port

into master cylinder fluid reservoir when piston is

pushed back into caliper. Remove excess fluid from

reservoir as required.

6. Push caliper mounting bracket inward and slip outer

brake pad past the edge to remove.

7. Remove the inner brake pad.

BRAKE SYSTEM

Table of Contents