Polaris RZR 900 2017 Service Manual page 209

24. Torque the oil sump cover bolts in sequence to
specification. Repeat the sequence to verify final
torque.
TORQUE
Oil Sump Cover Bolts:
M6 Bolts:
9 ft-lb (12 Nm)
M8 Bolts:
26 ft-lb (35 Nm)
25. Reinstall the crankcase drain plug if previously
removed. Torque drain plug to specification.
TORQUE
Crankcase Drain Plug:
22 ft-lbs (30 Nm)
26. Rotate the engine so the cylinder is facing up.
l
27. Reinstall the oil cooler , if previously removed. Use
new O-rings upon installation
9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual
© Copyright Polaris Industries Inc.
28. Torque oil cooler retaining bolts to specification.
29. Proceed to Flywheel Installation page 3.76 and then
1(
.
ENGINE / COOLING SYSTEM
TORQUE
Oil Cooler Retaining Bolts:
7 ft-lb (10 Nm)
Cylinder Head Installation page 3.79.
3
3.75