Polaris RZR 900 2017 Service Manual page 487

53. Apply a thin layer of shock oil to the bearing
assembly's external O-ring.
54. Push bearing assembly in with your finger tips.
55. Install retaining ring.
56. Use IFP tool to push down on IFP and fully extend the
shock shaft assembly.
9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual
© Copyright Polaris Industries Inc.
STEERING / SUSPENSION
57. Remove bleed screw and set IFP to the appropriate
height.
58. While holding the IFP, install bleed screw with O-ring
using a 9/16" open end wrench.
59. Install reservoir cap O-ring on cap and apply a thin
layer of shock oil to side and O-ring.
60. Install reservoir cap and retaining ring.
9
9.45