Polaris RZR 900 2017 Service Manual page 429

14. Remove four Torx T40 screws
floor and remove the rear floor.
h
15. Remove the Torx screws
and remove the main floor from the vehicle.
9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual
© Copyright Polaris Industries Inc.
g
retaining the rear
retaining the main floor
REAR PROP SHAFT INSTALLATION 4
1000
1. Reverse the appropriate Rear Prop Shaft Removal (4
seater) page procedure to reinstall the rear prop
shaft.
2. Lubricate the transmission output shaft splines with
Polaris All Purpose Grease.
3. Lubricate the front and rear prop shaft mid joint with
Polaris All Purpose Grease.
4. Align the front and rear prop shafts and slide them
together.
NOTICE
Paint marks are applied to the front and rear propshafts
to aid shaft alignment. Reference these marks during
installation if still visible.
5. Torque the support bearing fasteners to specification.
TORQUE
Support Bearing Fasteners:
33 ft-lb (45 Nm)
FINAL DRIVE
8
8.23