Polaris RZR 900 2017 Service Manual page 402

TRANSMISSION
17. Install the idler gear shaft assembly
2*
assembly , and input shaft assembly
transmission housing, all at the same time.
18. Install the rear output shaft assembly
19. Assemble the shift shaft rail if previously
disassembled.
NOTICE
Both shift forks need to be orientated the same way, so
that the shift fork pins are both offset to the same side
of the rail.
7.30
2&
, gear cluster 20. Install the shift shaft rail
2(
into the
3)
.
Shift fork pins should be offset towards the input shaft
21. Inspect the shift drum for any damage or wear.
9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual
3!
transmission housing as an assembly. Be sure the
shift forks are engaged into the engagement dogs.
NOTICE
as shown above
Inspect the splines of the shift drum.
and shift forks into the
3@
.
© Copyright Polaris Industries Inc.