Polaris RZR 900 2017 Service Manual page 380

TRANSMISSION
14. If internal transmission repair is required, drain the
transmission lubricant (see Chapter 2 – Transmission
Lubrication page 2.46).
15. Remove the stabilizer bar mounting bolt and nut
from both sides. Discard nuts and replace with new
upon assembly.
16. Remove the fasteners
arms to the bearing carriers (left and right side).
Discard nuts and replace with new upon assembly.
Allow the radius rods swing downward.
7.8
j
attaching the upper control
17. Pivot the control arms downward and maneuver the
drive shafts out of the vehicle frame.
h
Be careful not to stretch the brake line when pivoting
the bearing carrier downward.
18. Place a spacer or support between the vehicle frame
and engine to hold the engine up in position.
19. Remove the PVT outer cover.
20. Remove the belt and driven clutch.
9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual
CAUTION
© Copyright Polaris Industries Inc.