1
PREPARATION
1.1
Applicable Models
The following models can be used for a series of operations described in this manual.
Programmable controller
FX5S CPU module
*1 The MR-JET-G-N1 cannot be used.
*2 The MR-J5-G-N1 and the MR-J5W cannot be used.
1.2
Operation Flow Diagram
1.
Preparing the required products
4.
Checking the communication
status
1 PREPARATION
9
1.1 Applicable Models
FX5UJ CPU module
FX5U CPU module
2.
MR Configurator2
MR Configurator2
5.
FX5UC CPU module
Setting the servo amplifiers
Ethernet
Creating programs and checking the operation
After RUN, ON for 1 scan
Servo amplifier
(Ethernet-compatible)
*1
FX5-ENET
MR-JET-G
3.
Setting the programmable
controller
Axis No.
Axis No.
Ethernet
*2
MR-J5-G
Ethernet