To set Data Type, click [...] and follow the step in the figure below.
Type Category
Structured Data Type
2.
Double-click "Detailed Setting" of "G_stLinkIEF" set in step 1. "Detailed Setting" is located in [Assign (Device/Label)]
column. Deselect [Use Bit Specification], set the device as shown below, and click [OK].
Label Name
bnRX
bnRY
unRWr
unRWw
*1 Set the specified label name. (fixed)
*2 Set the data name of the structure you have specified before here. (Page 32 Addition of structures (labels))
Because the data type can be selected in "Data Type Selection", you do not need to input characters in this field.
*3 The field will be displayed by clicking [Detailed Setting].
*4 When [Detailed Setting] is selected, [Easy Display] is displayed.
*5 To input this value in the field, [Use Bit Specification] must be deselected.
Data Type
stRemoteReg
Data Type
Bit (0..127)
Bit (0..127)
Word [Unsigned]/Bit String [16-bit] (0..63)
Word [Unsigned]/Bit String [16-bit] (0..63)
Deselect it.
Device
*5
B0
*5
B80
W0
W40
Double-click
3 PROGRAMMABLE CONTROLLER SETTINGS
3.6 Adding Structures and Global Labels
3
34