Chapter 7 Preparation For Operation; Setting By The Parameter - Mitsubishi Electric CC-Link-AnyWire Bitty Bridge User Manual

CHAPTER 7
7.1

Setting by the Parameter

This section provides an example of the parameter setting for the MELSEC-Q series systems.
In the MELSEC-A/QnA series systems, settings cannot be configured by the network parameters. Configure the setting on
the program. ( Page 43, Section 7.2)
When applying the program examples introduced in this manual to the actual system, ensure the applicability and confirm
that it does not cause system control problems.
(1) System configuration
40
PREPARATION FOR OPERATION
Master module
Start I/O number : 0000(X0 to X1F/Y0 to Y1F)
CC-Link
AnyWire Bitty
AnyWire Bitty
terminating
*1
unit
*1: Manufactured by Anywire Corporation
: QJ61BT11N
NZ2AW1C1BY (station No.1)
4 stations occupied
AnyWire Bitty
remote I/O module (input)
Address: 0 to 15
AnyWire Bitty
remote I/O module (output)
Address: 0 to 15
*1
*1