Initial Setting - Pentax R-2501NS Instruction Manual

8.10 Initial setting 4

1. Selection of Temperature unit setting: [TEMP. UNIT]
Select ° C or ° F as the unit for Temperature.
2. Selection of Pressure unit setting: [PRESS UNIT]
Select hPa (hectopascal), mmHg, inchHg as the unit for
pressure to be input.
3. Selection of Distance unit setting: [DIST. UNIT]
Select m or ft or ft+inch as the unit for Distance.
4. Selection of Angle unit setting: [ANG. UNIT]
Select DEG or DEC or GRD or MIL as the unit for Angle.
8.11 Initial setting 5
Selection of Communication Setting: [COMM.SELECT]
Select RS-232C or Bluetooth.
* Bluetooth PIN Code : 1234
You have to perform the following setup, when you choose "RS-232C."
1. Selection of Transfer rate (baud rate): [BAUD UNIT]
Select a baud rate of 1200, 2400, 4800 or 9600.
2. Selection of Data bits: [DATA LENGTH]
Select a data length of 8 bits.
3. Selection of Parity: [PARITY BITS]
Select no (NIL) parity bit, even parity or odd parity.
46
X1.ﾟ CXXXXXXXXXX
2.ﾟ F
X1. hPa XXXXX
2. mmHG
3.inchHG
X1.m XXXXX
2.ft
3.ft+inch
X1.DEG
2.DEC
3.GRD
4.MIL
X1.RS-232C
2.Bluetooth
X1.1200
2.2400
3.4800
4.9600
X1.8XXXXXXXXXXXX
X1.NIL XXXXX
2.EVEN
3.ODD
XXX
XXX
XXX