Press the numeric key as 123.4520.
Press the [ENT] key to accept the horizontal angle
set to 123° 45' 20" and change the screen to
MODE A.
• The former data is called by pressing the
[CLEAR] key again.
5.5 Displaying the slope % of the vertical angle
Press [F5][MODE] to enter MODE B.
Press [F2][ANG SET] to display the ANGLE SET
screen.
Press the [F5][SELECT] to change the screen to
display the slope % of Vertical angle.
Press [F4][DISP] to display the slope value in %.
• The 0% represents the horizontal 0, and +100% and -100% represent 45° up and down
slopes respectively.
32