Pentax R-2501NS Instruction Manual page 16


Plug the AC cord to AC Adapter

Plug in AC Adapter to Battery Charger

Plug the AC wall battery charger into the wall socket and power LED turns ON

Place your battery in charger bay correctly

Wait until battery LED indicator turns GREEN for a full charge
LED
NONE
GREEN
RED
Flashing RED
A fully discharged battery will take approximately 2 hours to fully charge and
may not light the LED status indicator when first mounted.
[Battery Installation and Replacement]
Removing the battery in use will cause the R-2500NS to restart or turn OFF. Use the
battery status indicator in data collection software to confirm which battery is "in
use" before hot-swapping batteries.

Press button to open battery door compartment

Use the guide to slide the battery into the R-2500NS

Swivel the battery door compartment up and push from the bottom until it latches completely
What you need to know
Can I remove one of the
batteries while the
R-2500NS is in use?
How long does it take to
charge a battery?
How do I know if battery
is fully charged?
Contact a Recycling Center to ensure proper disposal of lithium-ion
Batteries.
Description
Battery is not seated correctly
Battery is fully charged
Battery is being re-charged
Charge error or bad battery
Before battery removal, use data collection software
to check which battery is in use. Remove the battery
not in use
It takes 2 hours to fully charge a battery
Battery bay LED turns Green when fully charged
15