External Connections - Pentax R-2501NS Instruction Manual

1.6 External connections

[Inserting SD card]
(1) Open the SD & USB slot cover.
(2) Insert the SD card(The side with terminal should face the instrument and the cut-off
corner should be up.)
(3) Insert the SD card to the end. Be sure not to press the card too hard.
(4) After the SD card is inserted, close the SD & USB slot cover completely.
[Removing SD card]
(1) Open the SD & USB slot cover.
(2) Lightly press the SD card slot then release yourself from there.
(3) The SD card pops up.
(4) After the SD card is removed, close the SD & USB slot cover completely.
CAUTION
• Be sure to turn the power off before inserting and removing the SD card.
• Be sure to close/open the SD & USB slot cover and insert/remove the SD card indoors.
[Suitability of SD card]
• SD card and SD logo is registered trademark.
• The SD cards listed in the following table have been tested by us and
it has been confirmed that the SD cards can be used with the R-2500NS series.
16
Slide the slot cover to left to
SD&USB Slot Cover
open the cover.
Cut-off corner
Direction to insert the
SD card
SD Card