1.7.8 Adjusting Illumination brightness
for LCD
+
2. Changing Instrument settings
You can change the instrument settings by "HELP" menu or by
inputting "007" code.
2.1 Help menu
While the screen is in MODE A or MODE B,
+
NOTE: Some items have sub-menus where the selecting
procedure, by using F1 - F4, is again repeated.
2.2 "007" code
While the screen is in MODE A or MODE B,
NOTE: Some items have sub-menus where the selecting
procedure, by using F1 - F4, is again repeated.
2.3 Instrument setting items
See chart on page 11
(for Reticle)
Select a desired item by
Change the setting
Input 007 code by using
Change the setting
7
or
or
x2
x2