9. Selection of second MEAS setting : [SEC. MEAS KEY]
Select whether the second distance measurement is
TRACK CONT or TRACK SHOT or MEAS CONT or
MEAS SHOT.
10. Selection of Minimum angle display: [MIN UNIT ANG.]
Select whether to set the minimum angle display mode to
"COARSE (5 seconds)" or "FINE (1 second)".
11. Selection of Vertical angle style: [V.ANG. STYLE]
Select whether the 0 point for vertical angle is set to be
"Z.0", "H.0" or "COMPAS".
12. Selection of Automatic power-off function
: [AUTO OFF]
Select the time interval (10, 20 or 30 minutes) for
activating the automatic power-off function, or select NIL,
disabling the function.
• The automatic power-off function automatically turns the
power supply off after the specified period of time (in minutes)
when no operation for distance measurement or for key entry
has been performed with the angle remaining unchanged.
13. Selection of Priority Display: [PRIORITY DISP.]
Select the display order of the sets of display items which
pressing the [DISP] key cycles through. The set of display
items selected here appears first after the power is turned
on.
X1.TRACK
CONTXXX
2.TRACK SHOT
3.MEAS. CONT
4.MEAS. SHOT
1.COARSE
X2.FINEXXXXXXXXX
X1.Z.0
XXXXX
2.H.0
3.COMPAS
X1.10 MIN
2.20 MIN
3.30 MIN
4.NIL
X1.HA
VA
VDXX
2.HA
VA SD
3.HAVA HDSDVD
XXX
45