Pentax R-2501NS Instruction Manual page 18

This test has been done with only the Pentax R-2500NS series Total Station, but no other
Pentax
Total Stations. When using with other Pentax Total Stations, please contact us to confirm
if it works properly.
Also it has been confirmed that the models mentioned in the following table can be used with
the R-2500NS series Total Station, but it has not been confirmed whether other brand SD
cards, not mentioned here, can be used with the R-2500NS series Total Station.
Please note that the test has been done by us and it is not meant that each SD card
manufacturer guarantees that the SD cards can be used with the Pentax R-2500NS series.
SD（micro SD）Card
Maker
Toshiba
Toshiba
Panasonic
Be sure to use the adaptor when using a microSD.
• Regardless of the information here, be aware that all the SDHC cards can't be used with
the R-2500NS Total Stations.
• Test item：The following has been done according to our test standard.
① When data is being sent (with connecting USB), it is necessary to be able to refer to
information in the SD card from PC and to operate the file.
② When writing / reading text, it is necessary to be able to read/write text file.
[Connecting USB cable]
(1) Open the SD & USB slot cover.
(2) Insert the USB connector into the USB port in the right direction.
(3) After the USB cable is removed, close the SD & USB slot cover
completely.
CAUTION
• Be sure to turn the power off before inserting/removing the USB
cable.
• Be sure to open/close the SD & USB slot cover and
insert/remove the USB cable indoors.
Model
SD-C01GTR
SD-MD001GA（microSD） 1GB
RP-SDM01GL1A
Capacity
1GB
1GB
17