Pentax R-2501NS Instruction Manual page 7

Do not aim the laser beam at a person as it is harmful to the eyes and body. Receive the
examination treatment by the doctor when the eyesight or body trouble is doubted by any
chance.
• Electro-Magnetic Compatibility (EMC):
This instrument complies with the protection requirement for residential and commercial
areas. If this instrument is used close to industrial areas or transmitters, the equipment can
be influenced by electromagnetic fields.
• Do not use this product in a coal mine, in a location where there is coal dust, or near
flammable material as there is a risk of explosion.
• Do not disassemble, modify or repair this product as there is a risk of fire, electric shock
and burn injury. If you think the product requires repair, contact the retail outlet where you
purchased it or an authorized repair site.
• Do not charge the BP07 Battery with any battery charger other than the BC05 battery
charger as it entails a risk of fire or burn injury from the battery bursting into flames due to
possible differences in voltage or polarity.
• Do not use a damaged electric cord plug or loose electric outlet when charging as there is a
risk of fire or electric shock.
• Do not charge the battery while covered by clothes or similar items as there is a risk of fire
if the clothes ignite.
• Do not use the battery or charger when wet as there is a risk of fire and burn injury due to
short-circuit.
• To prevent making short-circuit when removing the battery and charger from the case and
storing them, apply electrically resistant tape to the poles of the battery. Storing the battery
and charger as it is may result in fire or burn injury due to short-circuit.
• Do not throw the battery into fire or expose it to heat as there is a risk of injury if it
explodes.
CAUTION
For your safety, perform the initial and periodical inspection as well as when the
instrument is fixed and adjusted.
When the laser beam enters eyes, an unexpected accident might be caused by blink of
eyes.
Do not place the laser product at a height where its laser beam may hit the eyes of car
drivers and pedestrians.
Do not place the laser product at a place where its laser beam may hit a reflecting object
such as a mirror or a glass window. The reflection beam of the laser is also harmful to the
human body.
When not performing measurement, cut off the power supply or shade the objective lens
with objective cap to prevent the instrument emitting the laser beam.
Keep the laser product in a place where persons, who do not have the product knowledge,
such as children, can not touch it by mistake.
• Before disposing of the instrument, destroy its power supply mechanism to prevent it from
emitting the laser beam.
• Do not remove the handgrip without good reason. If it does come off, be sure to attach it
securely to the instrument with screws. If it is not fastened securely, the instrument may
fall when you use the handgrip, leading to possible injury.
6