8. INITIAL SETTING
8.1 Overview
For the R-400V series, you can select and save the desired setting for a variety of prescribed
instrument conditions, called initial setting.
The Initial Setting is saved in five modes, "initial setting 1", "initial setting 2",
"initial setting 3", "initial setting 4", and "initial setting 5" in which you can select and save
the instrument conditions described below.
The factory default for each of these conditions is marked by
To change initial setting, follow the operating procedures for entering each initial setting
mode in "8.2" and the operating procedures for changing an initial setting in "8.2".
8.2 Entering the mode for initial setting 1
Press the [POWER] key while holding [F1] key
down to access the screen for initial setting 1.
• Pressing [F1] [ △ ] scrolls it up five items;
pressing [F2] [ ▽ ] scrolls the screen down five
items.
• Press [F3] [
] or [F4] [
cursor at the item of interest.
8.3 Entering the mode for initial setting 2
Press the [POWER] key while holding [F2] key
down to access the screen for initial setting 2.
• Select the item of interest in the same way as
in the mode for initial setting 2.
8.4 Entering the mode for initial setting 3
Press the [POWER] key while holding [F3] key
down to access the screen for initial setting 3.
] to position the
.
41