Table of Contents
Advertisement
3.6 Target sighting
[Target sighting by Manual focus]
① Loosen the telescope clamp and horizontal clamp screws.
② Point the telescope at the target using a collimator.
③ Tighten the above two screws.
④ Adjust the eyepiece.
⑤ Look through the telescope and then rotate the Focus ring and stop it where the target can
be clearly seen and the target image does not move in relation to reticle even if your eye is
vertically and horizontally moved.
⑥ Align the reticle accurately on the target using telescope and horizontal tangent screws.
• The Focus ring rotation "clockwise" makes it possible to focus on closer objects and
"counter clockwise" will focus on further objects.
Quick Stakeout is possible by guide right
who knows the movement direction by a
look.
You can move the movement direction to
the Stakeout linear top easily by green and
2 colors of red LED.
-> If green is seen, it's to the right.
<- If red is seen, it's to the left.
26
Collimator
Focus Ring
Target sighting
Target
Advertisement
Table of Contents
