Setting "Vertical Angle And Percent Grade" Mode With The "V/%" Key - Pentax W-1502N Series Instruction Manual

②Click "S.Angle" key,
and a dialog box will be
ejected, as is showed in
the right figure.
③Input horizontal angle
you need.
※ 1
Such as：232°26'26"
④With
data
complete ， click "Enter"
key,and
measurement
orientation will go on.
※1 Data entry should be refered to the format shown in the dialog box.
4.3.5 Setting "vertical angle and percent grade" mode with the
"V/%" key
Make sure the operation is under angle measurement mode.
Operation steps
【S.Angle】
input
horizontal
angle
entry
【Enter】
angle
after
Keys Display
29