1. Fuse box
2. Positive battery lead
3. Starter relay
4. Fuel tank fitting bracket
5. Canister assembly
6. Rear brake light switch
7. Rear wheel speed sensor lead
8. Rear frame
9. Fuse box lead
10. Plate
11. Starter relay lead
12. Frame component
13. Rear brake light switch lead
CABLE ROUTING
A. Clamp shall be touched with welding bead of fuel
tank fitting bracket.
B. Route the rear brake light switch lead through wire
guide.
C. Direct insert direction.
D. Connector shall be inserted on plate.
E. Insert the starter relay assembly to rear frame.
F. Wire harness shall be clamped to frame
component on white tape.
G. Tip of plastic band shall be directed downward.
Positive battery lead shall be clamped to frame
component on white tape.
2-40
SPEC