Yamaha R15 2022 Service Manual page 101

1. Rubber cover
2. Right handlebar switch lead
3. Main switch lead
4. Left handlebar switch lead
5. Left handlebar switch
6. Cable guide
7. Throttle cable (Pull)
8. Throttle cable (Return)
9. Clutch switch connector
10. Lever holder
11. Clutch switch lead
12. Crown handle
13. Clutch cable
14. Radiator cover
15. Front brake hose (Master cylinder to ABS hydraulic
unit)
16. Horn
17. Horn lead
18. Frame component
19. Radiator assembly
CABLE ROUTING
A. Right handlebar switches (blue & black connector)
& main switch (white connector) shall be connect
under rubber cover not into rubber cover.
B. Main switch lead routing shall be parallel with right
handlebar switch lead.
C. Clutch cable, throttle cables and left handlebar
switch lead shall pass through cable guide.
D. Pass the throttle cables front side of clutch cable.
E. Pass the throttle cables above front brake hose
(Master cylinder to ABS hydraulic unit).
F. Pass the main switch lead through cable guide.
G. No slack between each clamps.
H. Left handlebar switch lead shall be clamped on
tape.
I. Pass the throttle cables through hole of radiator
cover.
J. Left handlebar switch lead shall be clamped to
front fork assembly.
K. Left handlebar switch lead shall be clamped in this
area. (target position shall be center of this area.
2-44
SPEC