Yamaha R15 2022 Service Manual page 52

GEN
INFO
SPECIAL TOOLS
Tool name/Tool No. Illustration
Front fork damper rod locknut holder (Left & right leg)
YSST-778
(90890-01953)
This tool is used to hold the damper rod locknut/spe-
cial nut when removing or installing the front fork cap
bolt.
Front fork dumper rod stopper tool (Right leg)
YSST-779
(90890-01592)
This tool is used to remove/install front fork dumper
rod stopper nut of right leg.
Clutch hub holder
YSST-733A
(90890-04086)
This tool is used to hold the Clutch boss while loosen-
ing & tightening clutch boss nut.
Drive chain cutter & riveting tool
YSST-734
This tool is used to dismantling the drive chain.
Fixing tool bearing steering lower
YSST-870
36
This tool is used to install under bracket
285
bearing steering lower.
Front fork oil seal installer
YSST-775A
(90890-01442)
These tools are used to install the oil seal and the dust
seal of the front fork legs.
Disc brake face out
YSST-890
This tool is used to check the runout.
Plate bearing installer
YSST-891
This tool is used to remove the camshaft bearing.
1-45