Yamaha R15 2022 Service Manual page 103

1. Frame component
2. Front fork assembly
3. Front wheel sensor assembly lead
4. Front fender
5. Front brake hose
6. Front brake hose (ABS hydraulic unit to front brake
caliper)
7. Front brake hose clamp
A. Front wheel sensor lead shall be passed to fit to
front brake hose assembly profile.
B. Stopper of front brake hose holder shall be
touched with front fork assembly.
C. When assembling front wheel sensor lead to lead
holder, application of silicone oil to front wheel
sensor lead assembly shall be allowed.
D. Fix clamp on white tape of front wheel sensor.
E. When assembling front wheel sensor lead to
frame, application of silicone oil to front wheel
sensor lead assembly shall be allowed.
F. Front wheel sensor assembly shall be passed as
shown on this drawing.
G. Attach the clamp part to the rear side.
H. Front wheel sensor assembly lead should be in the
range shown in illustration.
I. Front brake hose (ABS hydraulic unit to front brake
caliper) shall be conformed to stopper of front
caliper assembly.
CABLE ROUTING
2-46
SPEC