Programming And Retrieving Fax Gateway Settings; Programming Fax Gateway Settings - Muratec F-320 User Manual

Example

Programming and Retrieving Fax Gateway settings

Retrieving Fax Gateway settings
When you want to retrieve Fax Gateway settings by mail, enter the following title on the Subject line.
%get-fax-gateway#xxxx%
To edit the retrieved parameter, store the E-mail file as text (.txt) on your PC.
Note: When the mail is sent properly, you will receive mail that contains a list of all Gateway registrations.

Programming Fax Gateway settings

To change or update the retrieved parameter, open the text file (.txt). Copy the body text and paste it on the body
of the newly created E-mail message. Delete any headers that may be present in the body of the E-mail.
When you want to program the Fax Gateway by mail, enter the following title on the Subject line.
%set-fax-gateway#xxxx%
Follow the following rules to program the settings.
1. All records should be enclosed with @start-record and @end-record.
2. You cannot begin a new line in between @start-record and @end-record.
3. Do not enter other records on the lines containing @start-record and @end-record.
Each record should be entered as follows:
No.;MailAddress;FaxNumber;
Parameter
1 No. Gateway number
2 mailaddress Gateway mail address
3 FaxNumber Delivery fax number
For multiple entry, separate them with comma
(xxxx is a password for remote access)
(xxxx is a password for remote access.)
Value
2.19