Muratec F-320 User Manual page 93
Internet fax kit
Hide thumbs
Also See for F-320:
- Operating instructions manual (142 pages) ,
- Specifications (2 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
11
Next, the machine asks for your F-Code box's password. This is the password for itu-t-compatible F-Code
fax transactions. The lcd shows:
03:Password
_
Note: You don't need to have a password for the F-Code box. However, using a password will make your
F-Code communication much more secure.
If you do not want to enter or change this box's password, skip to step 14.
12
Use the numeric keypad to enter this box's ITU-T-compatible password. This password can be up to 20
characters in length and include any combination of numbers and the * and # characters (but no other
non-numerical characters).
Note: You cannot change the type of an existing F-Code box. If you're modifying an existing F-Code box
and want to change the box type, you first must erase the old box, then create a new one.
13
Press ENTER to save the password. The LCD now shows:
Box Type
14
Press
or
to select "Relay" and then press ENTER.
15
The machine asks for the fax number for the remote unit. The LCD shows:
Enter Relay Number
_
Press Internet Fax to toggle the fax number input mode and e-mail address input mode.
Enter Mail Address
To :_
Enter the e-mail address and/or fax number using a one-touch key, a speed-dial number or a call group
number. You cannot use the numeric keypad to enter these numbers.
To add each number, press BROADCAST between each one to insert a comma, then enter the number.
You can specify up to 200 numbers for a remote unit.
17
Press enter to save the settings. The LCD shows:
Select TTI
The machine asks for the type of TTI you want to appear on the faxes that are relayed to other callers.
• Sender — Relay the document with sender unit's TTI (don't send your TTI).
• Both — Relay the document with both the sender unit's TTI and your TTI.
• Yours — Relay the document with your TTI instead of the sender unit's.
Press
or
until the mode you want appears.
18
Press ENTER to save the settings. The LCD shows:
Auto Print
On: Print the document automatically when it's received.
Off: The machine does not print it, but will only relay it to the other machine.
5.10
:Bulletin
/ /Enter
:Sender
/ /Enter
:Off
/ /Enter
Advertisement
Table of Contents
