Muratec F-320 User Manual page 94
Internet fax kit
Hide thumbs
Also See for F-320:
- Operating instructions manual (142 pages) ,
- Specifications (2 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
Press
or
until the mode you want appears.
Then press ENTER to save the settings and go on to step 19.
19
The machine asks for your F-Code box's four-digit security I.D. code. This is the I.D. code for the box's secu-
rity, which you must enter before you can make any changes to this F-Code box.
03:Set F-Code Box
Enter I.D. Code:0000
If you do not want to set or change the I.D. code, skip to step 22.
20
Decide on a four-digit I.D. code (0001-9999) for this F-Code box. Write it down, and put it in a safe place.
Important: Do not use 0000 as an I.D. code.
21
Use the numeric keypad to enter the four-digit I.D. code for this F-Code box.
Important: After completing this step, you must know this code to access this F-Code box. Be sure to
write it down.
22
Press ENTER to save the F-Code box information.
23
To finish, press STOP.
5.11
Advertisement
Table of Contents
