Muratec F-320 User Manual page 81

9
Enter the fax number. Use either a one-touch number, a speed-dial number, a mail group number or
numeric keypad.
ABC Shoji
To :S001,[01]_
Note: If you enter characters by mistake, press CANCEL to erase them.
10
To add more fax numbers, repeat steps 8 to 9.
11
Press START. The machine will start to scan the document into memory. Then it will start sending the
e-mail and fax to each address.
If two or more accounts are registered, the LCD asks you to enter the account name to use for sending.
AccountName;Upper
_
To use the default account, press ENTER without entering any characters.
To use a different account, press
name, then press ENTER twice.
If the account is configured with a password, enter the password, then press ENTER.
Password
_
Note: The account password should be entered with matching the case of letters.
4.18
to display the account name list, then use
;Upper
or to select the account