Muratec F-320 User Manual page 70

For F-320
1
Place the document(s) face up, top edge first. Adjust the document guides — by sliding either of them to
the left or right — to fit the page(s) you'll be sending.
2
Press Internet Fax to choose Internet FAX communication.
MailAddress;Lower
_
3
Select "To", "Cc" or "Bcc" by pressing the soft key which assigned "To/Cc/Bcc" (see page 4.2).
4
Press SPEED DIAL/GROUP and then enter 3-digits number (001 to 144) for speed-dial number you
want to use. The LCD shows the Location ID (or e-mail address) you stored:
abcde@domain
To :S001_
5
Press START. The machine will start to scan the document into memory. Then it will start sending the e-mail
message.
If two or more accounts are registered, the LCD asks you to enter the account name to use for sending.
AccountName;Upper
_
To use the default account, press ENTER without entering any characters.
To use a different account, press
name, then press ENTER twice.
If the account is configured with a password, enter the password, then press ENTER.
Password
_
Note: The account password should be entered with matching the case of letters.
to display the account name list, then use
;Upper
or to select the account
4.7