Using Mail Broadcast List - Muratec F-320 User Manual

Using mail broadcast list.

The mail broadcast list uses group numbers 65-96.
To use this feature, you must first preprogram the mail broadcast list. (Refer to page 3.19.)
For F-360
1
Place the document(s) face up, top edge first. Adjust the document guides — by sliding either of them to
the left or right — to fit the page(s) you'll be sending.
2
Press Internet Fax to choose Internet FAX communication.
3
Select "To", "Cc" or "Bcc" by pressing the soft key which assigned "To/Cc/Bcc" (see page 4.2).
4
Press SPEED DIAL/GROUP twice.
5
Enter a mail group number (65-96).
Note: If you want to send a e-mail to several groups at a time, press broadcast then repeat steps 3–5.
6
After entering, press START. The machine will start to scan the document into memory. Then it will start
sending the e-mail message to each address.
If two or more accounts are registered, the LCD asks you to enter the account name to use for sending.
To use the default account, press [Default] or ENTER without entering any characters.
To use a different account, press [List], and use the cursor key to select the account name from the list,
then press ENTER.
If the account is configured with a password, enter the password, then press ENTER.
Note: The account password should be entered with matching the case of letters.
4.14