Programming Account Settings; Retrieving Fax Transmission History; Retrieving Fax Reception History; Retrieving Mail Transmission History - Muratec F-320 User Manual

Programming Account settings

To change or update the retrieved parameter, open the text file (.txt). Copy the body text and paste it on the body
of the newly created E-mail message. Delete any headers that may be present in the body of the E-mail.
When you want to program an account by mail, enter the following title on the Subject line.
%set-acccount#
XXXX
Follow the following rules to program the setting.
Enter the account name (account ID) and account password at the beginning of the line as follows:
%id=
( : account name.)
XXXX
XXXX
%password=
YYYY
Note: The account ID (account name) and password should be entered with matching the case of letters.
Note: One parameter should be entered per line from the start of the line.
Note: According to the e-mail software or mail server, the long parameter may be divided into two or more lines
automatically. In this case, after entering about 70 characters, press Enter key to start a new line and put
one space at the beginning of the next line.
As for the following functions, only retrieving functions are available.

Retrieving Fax transmission history

When you want to retrieve the Fax transmission history by mail, enter the following title on the Subject line.
%get-fax-tx-log#
XXXX
Note: Fax transmission history will be in the body of the mail that comes in response.
Each record will be separated by semicolons (;).

Retrieving Fax reception history

When you want to retrieve the Fax reception history by mail, enter the following title on the Subject line.
%get-fax-rx-log#
XXXX
Note: Fax reception history will be in the body of the mail that comes in response.
Each record will be separated by semicolons (;).

Retrieving Mail transmission history

When you want to retrieve the Mail transmission history by mail, enter the following title on the Subject line.
%get-mail-tx-log#
XXXX
Note: Mail transmission history will be in the body of the mail that comes in response.
Each record will be separated by semicolons (;).

Retrieving Mail reception history

When you want to retrieve the Mail reception history by mail, enter the following title on the Subject line.
%get-mail-rx-log#
XXXX
Note: Mail reception history will be in the body of the mail that comes in response.
Each record will be separated by semicolons (;).
2.22
%
(xxxx is a password for remote access)
( : account password)
YYYY
%
(xxxx is a password for remote access.)
%
(xxxx is a password for remote access.)
%
(xxxx is a password for remote access.)
%
(xxxx is a password for remote access.)