Muratec F-320 User Manual page 90
Internet fax kit
Hide thumbs
Also See for F-320:
- Operating instructions manual (142 pages) ,
- Specifications (2 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
13
Select "Password" and press ENTER. The LCD shows:
Note: You don't need to have a password for the F-Code box. However, using a password will make your
F-Code communication much more secure.
14
Use the numeric keypad to enter this box's ITU-T-compatible password. This password can be up to 20
characters in length and include any combination of numbers and the * and # characters (but no other
non-numerical characters).
15
Press ENTER. The LCD shows:
16
Select "Location" and press ENTER. The LCD shows:
17
Press Internet fax to toggle the fax number input mode and e-mail address input mode.
Enter e-mail address and/or the fax number using a one-touch key, a speed-dial number or a call group
number. You cannot use the numeric keypad to enter these numbers.
To add each number, press BROADCAST between each one, then enter the number.
You can specify up to 300 numbers for a remote unit.
Note: If you want to review the numbers you entered, press [Review].
If you want to erase any number, move the cursor on it and press [Erase].
When you finish to review, press [Return] to return to the previous display.
18
Press ENTER. The LCD shows:
5.7
Advertisement
Table of Contents
