Muratec F-320 User Manual page 89
Internet fax kit
Hide thumbs
Also See for F-320:
- Operating instructions manual (142 pages) ,
- Specifications (2 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
6
The LCD now shows:
7
Select "Relay box" and then press ENTER.
8
The LCD shows:
9
Select "Box Name" and press ENTER.
10
Enter the name by using the numeric keypad then press ENTER.
An F-Code box's name can be up to 16 characters in length.
11
Select "Sub-Address" and press ENTER.
The fax machine asks for this F-Code box's sub-address. This is the numerical identifier you must enter in
order to communicate with any remote F-Code compatible fax.
12
Use the numeric keypad to enter the sub-address to identify this F-Code box and then press ENTER.
The sub-address can be up to 20 characters in length and include any combination of numbers and the
* and # characters (but no other non-numeric characters).
Note: No other F-Code box in this machine can have the same sub-address as the one you enter here.
Note: If you entered a sub-address that is already being used by another F-Code box, the machine will beep
and briefly display "Already Stored". The machine will now return you to step 11. Enter a different num-
ber for your F-Code box's sub-address.
5.6
Advertisement
Table of Contents
