Sending Using A Speed-Dial Number - Muratec F-320 User Manual

Sending using a speed-dial number.

For F-360
1
Place the document(s) face up, top edge first. Adjust the document guides — by sliding either of them to
the left or right — to fit the page(s) you'll be sending.
2
Press Internet Fax to choose Internet FAX communication.
3
Select "To", "Cc" or "Bcc" by pressing the soft key which assigned "To/Cc/Bcc" (see page 4.2).
4
Press SPEED DIAL/GROUP and then enter 3-digits number (001 to 244) for speed-dial number you
want to use. The LCD shows the Location ID (or e-mail address) you stored:
5
Press START. The machine will start to scan the document into memory. Then it will start sending the e-mail
message.
If two or more accounts are registered, the LCD asks you to enter the account name to use for sending.
To use the default account, press [Default] or ENTER without entering any characters.
To use a different account, press [List], and use the cursor key to select the account name from the list,
then press ENTER.
If the account is configured with a password, enter the password, then press ENTER.
Note: The account password should be entered with matching the case of letters.
4.6