Retrieving E-mail
Programming E-mail environment settings
To change or update the retrieved parameter, open the text file (.txt). Copy the body text and paste it on the body
of the newly created E-mail message. Delete any headers that may be present in the body of the E-mail.
When you want to program E-mail environment settings by mail, enter the following title on the Subject line.
%set-email-settings#xxxx%
Each parameter should be entered as follows:
Note: One parameter should be entered per line from the start of the line.
According to the e-mail software or mail server, the long parameter may be divided into two or more lines
automatically. In this case, after entering about 70 characters, press Enter key to start a new line and put
one space at the beginning of the next line.
(xxxx is the password for remote access.)
%Parameter = Value
2.17