Muratec F-320 User Manual page 92

For F-320:
Note: If your machine is an F-360, see page 5.5.
1
Keep pen and paper with you as you follow these steps. As you decide on a sub-address and enter it into
your machine, write it down. Remember to:
(1) write down which box goes with which sub-address, (2) write down any passwords or I.D. codes you
enter, (3) keep these printed records in a safe place.
2
Press MENU, 3, 5, 1, ENTER. The LCD shows:
Select F-Code Box
01:No Number Stored
3
Use the numeric keypad to enter the two-digit number (01-50) of the F-Code box you want to create or
modify.
4
Press ENTER. What you do next depends on whether you're creating or modifying the F-Code box:
If creating — skip to step 6.
If modifying — the LCD asks you to enter the proper I.D. code. The LCD shows:
03:Set F-Code Box
Enter I.D. Code:****
5
Use the numeric keypad to enter the 4-digit I.D. code (not the itu-t sub-address and not the itu-t pass-
word). Then press ENTER. Skip to step 7.
Note: If you enter an invalid I.D. code, the fax machine rejects the attempt and aborts this operation.
Note: If you want to modify an existing F-Code box and want to change the box type, you first must erase
the old box, then create a new one.
6
The machine is now asking you to name this F-Code box. The LCD shows:
03:Box Name;Upper
_
If you do not want to enter or change this F-Code box's name, skip to step 8.
If you do want to enter or change this F-Code box's name, go on to step 7.
7
Enter the name by using the numeric keypad. An F-Code box's name can be up to 16 characters in length.
8
Press ENTER to save the box's name and continue. The LCD shows:
03:Sub-Address No.
_
The fax machine now asks for this F-Code box's sub-address. This is the numerical identifier you must
enter in order to communicate with any remote F-Code compatible fax.
If you do not want to change an existing sub-address, skip to step 10.
9
Use the numeric keypad to enter the sub-address to identify this F-Code box.
The sub-address can be up to 20 characters in length and include any combination of numbers and the
* and # characters (but no other non-numeric characters).
Note: No other F-Code box in this machine can have the same sub-address as the one you enter here.
10
Press ENTER to save the sub-address.
Note: If you entered a sub-address already being used by another F-Code box, the machine beeps and
briefly displays "Sub-address in Use". The machine now returns you to step 10. Please enter a
different number for your F-Code box's sub-address.
5.9