Forwarding The Received E-Mail To Fax; Fax Forwarding Setting - Muratec F-320 User Manual

Forwarding the received e-mail to fax

With this function, e-mail that contains the designated fax numbers in a text can be forwarded as a fax.

Fax Forwarding setting

All you have to do is to send mail with forwarding fax numbers in a text. Then the IF-300 analyzes the mail at
the gateway and forwards e-mail messages to the fax numbers in the mail.
Note: Both Fax forwarding request and Fax forwarding are original Muratec functions, so both the requesting
and distributing machines need to be Muratec products.
Designate Fax Forwarding numbers in the text of the mail as follows:
FAXNO:=< >
XXXX
xxxx: forwarding fax number
1. Always begin from the start of the line.
2. As long as above condition is fulfilled, the number can be written anywhere in the text.
3. "FAXNO" can be written in either upper case or lower case.
4. Fax numbers can have a maximum of 40 digits per number, and a total of 30 fax numbers.
5. When you designate multiple numbers as a broadcast, separate them with comma (,).
Example: FAXNO:=<123-4567,987-6543>
6. Available numbers for broadcasting is dependent on the specifications of the fax used as a gateway.
7. However, if there is a wrong fax number in the mail when designating broadcasting, the mail will not be
forwarded, but an error report will be returned.
Example:
5.15