Programming And Retrieving Account Settings - Muratec F-320 User Manual

Programming and Retrieving Account settings

The following is the list of parameters and values for available items.
Items
Name
Mail address
Reply To address
Subject
When mail that cannot be analyzed is
received
Automatic reception ON/OFF
Mail check only
Automatic deletion
Copy send message by Bcc
Destination mail address of above
copy message
Copy send message by separate mail
Destination mail address of above
copy message
Copies receive message
Destination mail address of above
copy message
Unconditional FAX forwarding of
received mai
Fax number of unconditional
Fax forwarding of received mail
Retrieving Account settings
When you want to retrieve account setting by mail, enter the following title on the Subject line.
%get-account#xxxx%
Follow the following rules to program the setting.
Enter the account name (account ID) and account password at the beginning of the line as follows:
%id=
( : account name.)
XXXX
XXXX
%password=
YYYY
Note: The account ID (account name) and password should be entered with matching the case of letters.
Note: One parameter should be entered per line from the start of the line.
Note: According to the e-mail software or mail server, the long parameter may be divided into two or more lines
automatically. In this case, after entering about 70 characters, press Enter key to start a new line and put
one space at the beginning of the next line.
To edit the retrieved parameter, store the E-mail file as text (.txt) on your PC.
Name
mailaddress
reply-to
subject
handling-junkmail
anto-receive
mail-check-only
auto-delete
copy-message
message-copy-address
archive-tx-message
tx-message-archive-address
archive-rx-message
rx-message-archive-address
forced-fax-relay
forced-relay-faxnumber
(xxxx is a password for remote access.)
( : account password)
YYYY
Parameter Value
(Enter name)
(Enter e-mail address)
(Enter the Reply to e-mail address)
(Enter the subject)
Report / Return / Forward-to (e-mail
addresses)
yes/no
yes/no
yes/no
yes/no
(Enter e-mail address)
yes/no
(Enter e-mail address)
yes/no
(Enter e-mail address)
yes/no
(Enter fax number)
2.21